fbpx

Home / Products / Slabshield Insulation / SlabShield VCL Insulation

SlabShield VCL Insulation

SlabShield Insulation has innovative interlocking tabs that provide a perfect seam when using several rolls side by side. The edges are overlapped and taped to maintain a VCL.

SlabShield provides an air infiltration barrier, vapour barrier and boosts thermal performance, in one simple to install product. SlabShield will not crack or crumble with normal job-site-abuses. It is puncture resistant up to 93 psi and crush resistant up to 70 psi.

Documentation

Low-E Insulation Warranty Information Sheet

Low-E Insulation COSHH Information Sheet

Slab Shield Insulation – Data Sheet

SlabShield Insulation

SlabShield Insulation has been designed specifically for use under concrete slabs, where floors heights are restricted. It is lightweight and cuts easily with a utility knife or scissors. SlabShield is only 11mm thick and will mould itself to the contours of the subfloor, to provide a better and stronger finished floor.

L4FSFB-15
Composition
Pure Aluminium / Recycled Foam / Pure Aluminium
Thickness
5.5mm
Width
1.25m
Length
4m
Coverage
5m²
Weight
225g/m²

Technical Details

Thermal Properties
Emissivity
0.05 (EN 16012)
Core Conductivity
0.0366 W/(mK)
Floor R-Value
Wall R-Value
Pitched Roof R-Value
Flat Roof R-Value
Fire/MVT/Air Permability
Fire Performance
N/A
MVTR
< 2000 (MN s/g)
Air Permability
ZERO (m3/h)/m²
Additional Testing
Fungi/Mould Resistance
Sound Transmission (STC)
Delamination
Corrosivity
Pass
Nail Tear
Tensile Strength
GWP
ZERO
Certification/Testing
Intertek
Specialist Testing
Fire Test – Tent Fabric (ASTM 6413)
Fire Test – Tent Fabric (BS EN 5915)
Full Scale Room Burn
Emissivity (ASTM 1371)
0.03

Pin It on Pinterest