We take Fire Safety very seriously at Low-E Reflective Foil Insulation. Over the past 30+ years we have carried out dozens fire test across continents, industries and applications.
We work with manufactures on a regular basis to develop new uses and applications for Low-E. If you have an application or use for Low-E and require a specific test please get in touch with our technical team. We would be happy to speak to you.
Fire safety, fire testing and fire classification are very different and can be very confusing. We have put together a list of the most common questions we get asked with regard to fire testing and reflective insulation.
- Is Low-E Reflective Foil Insulation flammable, fireproof, fire resistant or fire retardant?
- What Is the Fire Rating of Low-E Insulation?
- How does Low-E Reflective Foil Insulation behave in a Fire?
- How does Low-E compare to other foil insulation materials?
- Does the Manufacturing Process Matter?
- Does foil insulation produce burning droplets?
- Does Foil Insulation Meet Building Regulations? And can foil insulation be left exposed, or must it be covered with plasterboard?
Is Low-E Reflective Foil Insulation flammable, fireproof, fire resistant or fire retardant?
This depends entirely on the application and the testing method. However, we would never describe Low-E as fireproof or even fire retardant.
The classification of fireproof is reserved for products that can be used to stop fire. They will never burn, no matter how long they are exposed to fire.
Fire-rated products will usually also have a time rating. For example, a fire door may be fire-rated for 30 minutes or 60 minutes.
What Is the Fire Rating of Low-E Insulation?
There is not a single answer to this question. Fire ratings for all products vary depending on the application.
We have carried out dozens of fire tests on Low-E over the years, across different continents, for various industries and applications – construction, vehicle manufacturing, textiles, etc.
For example, when tested for automotive applications under ISO 3795, Low-E did not catch fire at all and was found to have:
- ZERO burn rating
- No ignition
- No flame
- No droplets
- No smoke development
When tested for the textile industry under BS EN ISO 6941, Low-E was given a PASS rating:
- No flames
- No after-flame
- No flaming droplets
When tested to BS 476, it was given a Class 1 rating, and under ASTM E84 it was given a Class A rating.
It is important to know that a Class A rating in the USA under ASTM E84 is not the same as a Class A Euro Class Rating under EN 13501-1.
How does Low-E Reflective Foil Insulation behave in a Fire?
When a flame is applied, the foam starts to soften. Then it collapses and shrinks away from the flame. The foam eventually melts completely. The foil facings are very thin and will often break and eventually fall away when the foam is gone and there is nothing to support them. Once the foam has melted and there is nothing left to burn, the flames subside.
In our post-fire testing, the foam outside the direct burn area remains intact. The foam did not continue to burn or spread flame.
How does Low-E compare to other foil insulation materials?
Most other foil insulation materials are manufactured using glues, which contribute to flame spread and smoke development. Low-E is produced without the use of glues.
Read more on how Low-E is made.
“Reflective” insulations are often manufactured using Mylar rather than aluminium. This makes a huge difference to the cost of producing the product and also to how it reacts to fire.
Does the Manufacturing Process Matter?
Yes, very much so. There are many copies of Low-E insulation on the international market, but only Low-E is made using our patented process that eliminates glues and adhesives. It is our patented heat-bonding process that sets us apart from all the other products.
Glues and adhesives contribute to flame spread and smoke development. Low-E Reflective Foil Insulation will burn in the presence of a flame but, importantly, will self-extinguish once the flame is removed.
Does foil insulation produce burning droplets?
A lot of foil insulations do produce droplets and this can be incredibly dangerous. However, no Low-E Insulation does not produce burning droplets. This is mainly down to the use of pure aluminum and not Mylar. In over 30 years, we have never seen Low-E produce ANY burning droplets in ANY of our testing.
Does Foil Insulation Meet Building Regulations? And can foil insulation be left exposed, or must it be covered with plasterboard?
This really depends on the relevant standard for the application.
In new-build construction, foil insulation may need to be covered with plasterboard as part of a compliant wall, ceiling or roof assembly. This is primarily about the fire performance of the overall building structure, including compartmentation and limiting fire spread, rather than a universal requirement that foil insulation itself must be covered.
In other applications, such as DIY radiator reflectors, automotive insulation or industrial insulation, different requirements apply.
The important point here is that Building Regulations apply to the building and its construction, not every product simply because it is described as insulation.
Whether foil insulation can be left exposed therefore depends on where and how it is installed, the applicable regulations and the product’s fire performance.




